A: To enter administration of your Norstar system, you must always
login by pressing [Feature] * * 2 6 6 3 4 4, followed by the password 2 3 6 4 6.
- At Terminals & Sets, press [Next] 5 times to Time & Date
- Press [Show], at Hour: x x
- Press [Change], enter Hour
- Press [Next]
- Press [Change]
- Enter Minutes
- Press [Next]
Follow the same steps for changing date then when completed, press [RLS].
A: To enter administration of your Norstar system, you must always
login by pressing [Feature] * * 2 6 6 3 4 4, followed by the password 2 3 6 4 6.
- At Terminals & Sets, press [Next] 3 times to System Speed Dial
- Press [Show]
- Enter Code: 01 – 70
- Press [Show]
- Press [Change] (depends on how system has been programmed)
- Enter 9 if access code is required, if not, skip this step
- Enter area code & telephone number
- Press [OK]
- Press [Next]
- At Use Prime Line, press [Next]
- At Display Digits = Y, press [Change] to Display Digits = N
- Press [Next]
- Press [Change]
- Type in Name
- Press [Next]
- At Bypass Restrictions, press [Change] to display Y
- Press [RLS] if complete or press [Heading] to enter and store another phone number
A: Memory buttons may be programmed to provide one-touch access
to outside autodial numbers, inside (intercom) autodial numbers and Norstar Features.
To Program Outside Phone Numbers Only:
- Press [Feature] * 1
- Press button to be programmed
- Enter telephone number
- Press [OK]
- Label Button
To Program Inside Autodial Numbers:
- Press [Feature] * 2
- Press button to be programmed
- Enter intercom (extension) number
- Label button
To Program Norstar Features:
- Press [Feature] * 3
- Press button to be programmed
- Press Feature key + feature code
- Label button
Note: In order to label button, press [Feature] * 0 (button inquiry) first. When
finished, press [RLS].
A: To enter administration of your Norstar system, you must always
login by pressing [Feature] * * 2 6 6 3 4 4, followed by the password 2 3 6 4 6.
- At Terminals & Sets, press [Show]
- Enter Extension Number
- Press [Show]
- At Capabilities, press [Next] one time to Names
- Press [Change]
- Enter First Name
- Press [Next]
- Press [RLS]
A: To enter administration of your voice mail system, you must
always login by pressing [Feature] 983, followed by the admin password assigned
to your phone system.
- Press [OK]
- Press [MBOX]
- Press [Change]
- Enter Mail Box Number
- Press [Reset]
- Press [RLS]
Also used to make changes to a mailbox, extension name, extension # and class of
service.
A: To enter administration of your voice mail system, you must
always login by pressing [Feature] 983, followed by the admin password assigned
to your phone system.
- Press [Other]
- Press [GLIST]
- Press [ADD]
- Press [OK]
- At the tone, record group name
- At MBOX Prompt, enter mailbox number you want to add
- Press [ADD] when you see the persons name
Repeat as necessary until you add all of the mailboxes. When done press [RLS] or
follow the prompts to add another group.